Dry Diamond cores and accessories: Accessories

Product ID: DC11000

Chuck adaptor pack. Comprises: Chuck adaptor, guide rod & drift

DC11000

Product ID: DC11010

Chuck Extension Bar 250mm long

DC11010

Product ID: DC11020

Chuck Adaptor

DC11020

Product ID: DC11021

SDS Adaptor pack. Comprises: SDS adaptor, guide rod & drift

DC11021

Product ID: DC11050

SDS Extension Bar 250mm long

DC11050

Product ID: DC11040

SDS Adaptor pack

DC11040

Product ID: DC11045

SDS max adaptor - with hammer stop

DC11045

Product ID: DC11051

A taper guide rod

DC11051

Product ID: DC11060

Drift key

DC11060

Product ID: DC11013

Extension 1/2" (female) to 1/2" (male) 250mm long

DC11013

Product ID: DC11070

13 x 400mm Chuck masonry bit

DC11070

Product ID: DC11080

13 x 460mm SDS Masonry bit

DC11080

Product ID: DC11052

10 x 200mm A taper pilot drill bit

DC11052

Product ID: DC11015

Hilti adaptor DD100 fitting to 1/2" (male)

DC11015

Product ID: DC11123A

1/2" BSP male to 1/2" BSP male A taper adaptor

DC11123A

Product ID: DC11061

1/2" Female to hex adaptor

DC11061

Product ID: DC11062

1/2" Female to SDS adaptor

DC11062

Product ID: MC11010

Small dust suction plate for dry core diameters 28mm to 92mm. Simple, yet highly effective low cost solution providing 100% dust free efficiency drilling when used in conjunction with our PV25 dust extractor or any other good extraction unit. Because the dust is drawn at source this product is far more effective than the more costly dust swivel accessories that fit to the machine chuck. In addition, because the dust is drawn at source it is acceptable to use either slotted or unslotted dry cores.

MC11010

Product ID: MC11012

Large dust suction plate for dry core diameters 102mm to 162mm. Simple, yet highly effective low cost solution providing 100% dust free efficiency drilling when used in conjunction with our PV25 dust extractor or any other good extraction unit. Because the dust is drawn at source this product is far more effective than the more costly dust swivel accessories that fit to the machine chuck. In addition, because the dust is drawn at source it is acceptable to use either slotted or unslotted dry cores.

MC11012