P6-TWC

special application triple disc - wall chasing blade
performance level - professional

The offset segment design of the P6-TWC creates a 30mm wide channel for the installation of conduit and pipework in popular construction materials, significantly reducing the need to chisel the centre of the chase. When used in conjunction with an appropriate dust extraction system (minimum of ‘M-Class’), it can dramatically reduce the amount of airborne dust and clearing up.

Performance Rating:

Product Details

Part NumberSpecifications
DP19120
125mm x 28.5mm x 22.2mm (5")

Suitable for use on:

  • Bricks - Class B Engineering
  • Bricks - Standard Facing Bricks
  • Concrete - General Purpose
  • Concrete Blocks - Lightweight 3 to 7 Newton
  • Concrete Blocks - Medium Density 7 to 12 Newton
  • Concrete Blocks - Solid Density 12+ Newton
  • Gritstone
  • Limestone
  • Sandstone - Abrasive
  • Tiles - Ceramic
  • York Stone

Machine Suitability

  • 125mm Wall Chasing machines
  • Metabo MFE40

Usage Advice:

  • Make certain the blade is suitable for the material before cutting
  • Always cut a straightline, do not attempt to change direction whilst cutting
  • In harder materials, it is advisable to cut the channel in two stages, going half depth on the first pass, before completing the cut at full depth. This will greatly reduce the load on the machine
  • Wall chasing creates a large amount go airborne dust. It is strongly advised that a dust extradition unit is used with a minimum specification of ‘M-Class’. This in addition to wearing the full and appropriate PPE.

Standards

  • EN13236: European Standard that regulates the safety requirements for super abrasive (diamond) products

More products in the Specialist Blades range

Registered Number: 02965789 England

Registered Address: The Quay, 30 Channel Way, Ocean Village, Southampton, SO14 3TG

Trading Address: Unit 10 The Boulevard, Altira Park, Herne Bay, Kent, CT6 6GZ, UK

Opening Hours

Mon-Fri: 8am - 5pm
Sat-Sun: Closed

Contact

Tel: +44 (0)1227 711555
This email address is being protected from spambots. You need JavaScript enabled to view it.

Opening Hours

Mon-Fri: 8am - 5pm
Sat-Sun: Closed

Contact

Tel: +44 (0)1227 711555
This email address is being protected from spambots. You need JavaScript enabled to view it. This email address is being protected from spambots. You need JavaScript enabled to view it.

About Us

Premier Diamond Products is a leading specialist supplier of top quality diamond blades, diamond core drills, diamond grinders
read more...


© Premier Diamond Products. All rights reserved.
Privacy Policy
Website and Design by Lemon Creative