P5-EDDC

Dry Diamond Cores

performance level - premium

A very special premium dry diamond core with laser welded segments which are jam packed with the most advanced metal bond technology and top spec diamonds. EVODRILLS are designed for dry drilling not only building materials but hard materials too, such as lightly reinforced concrete, clay products and Indian sandstone. The spiral barrel helps remove debris and increases air flow to the cutting edge while the superior segments drill faster and more efficiently than other dry cores. *DC12875 EVODRILL 5 Piece Set comprises: 42mm, 52mm, 65mm, 117mm & 127mm dry diamond cores + Chuck & SDS adaptors, chuck & SDS extensions, A-taper drill bit, Guide rod & Drift key.

Features: Laser welded, spiral barrel, turret design segments and ½˝ BSP female thread.

Performance Rating:

Product Spec Sheet

Product Details

Part Number	Specifications
DC12645	22 x 300mm
DC12647	25 x 300mm
DC12650	28 x 300mm
DC12651	32 x 150mm
DC12652	38 x 150mm
DC12653	42 x 150mm
DC12654	48 x 150mm
DC12655	52 x 150mm
DC12655A	57 x 150mm
DC12656	65 x 150mm
DC12657	78 x 150mm
DC12665	82 x 150mm
DC12667	92 x 150mm
DC12658	102 x 150mm
DC12659	107 x 150mm
DC12659A	112 x 150mm
DC12660	117 x 150mm
DC12661	127 x 150mm
DC12661A	132 x 150mm
DC12668	142 x 150mm
DC12662	152 x 150mm
DC12663	158 x 150mm
DC12663A	162 x 150mm
DC12664	175 x 150mm
DC12666	202 x 150mm
DC12875	EVODRILL 5 Piece Set*
DC12875a	EVODRILL 3 Piece Set*

Suitable for use on:

Bricks - Class A Engineering
Bricks - Class B Engineering
Bricks - Standard Facing Bricks
Clay Products
Concrete - General Purpose
Concrete - Light Steel Reinforcement
Concrete Blocks - Lightweight 3 to 7 Newton
Concrete Blocks - Medium Density 7 to 12 Newton
Concrete Blocks - Solid Density 12+ Newton
Sandstone - Abrasive
Sandstone - Indian

Machine Suitability

Dry Diamond Core Drill
SDS Plus Drills with Slipping Clutch

Usage Advice:

Maximum performance can be achieved by using a purpose made dry diamond core drill fitted with a slipping clutch. These machines are a minimum of 850 watts and have a high RPM to ensure the diamond segments work to their full potential. SDS plus drills can be used to dry core drill, although the lower RPM will result in slower drilling, especially in harder and/or damp materials.
N.B. Dry diamond core drills should not be used on hammer action.

Standards

EN13236: European Standard that regulates the safety requirements for super abrasive (diamond) products

Video Tutorial

Registered Number: 02965789 England

Registered Address: The Quay, 30 Channel Way, Ocean Village, Southampton, SO14 3TG

Trading Address: Unit 10 The Boulevard, Altira Park, Herne Bay, Kent, CT6 6GZ, UK

Opening Hours

Mon-Fri: 8am - 5pm
Sat-Sun: Closed

Contact

Tel: +44 (0)1227 711555
This email address is being protected from spambots. You need JavaScript enabled to view it.

Opening Hours

Mon-Fri: 8am - 5pm
Sat-Sun: Closed

Contact

Tel: +44 (0)1227 711555
This email address is being protected from spambots. You need JavaScript enabled to view it. This email address is being protected from spambots. You need JavaScript enabled to view it.

About Us

Premier Diamond Products is a leading specialist supplier of top quality diamond blades, diamond core drills, diamond grinders
read more...