P5-WC ½˝

Wet Diamond Cores 1/2" BSP

performance level - premium

Premium wet diamond cores designed for drilling into concrete & reinforced concrete using suitable diamond drilling machines that run at appropriate speeds. The machine speed is mainly dependant on the core size and strength of the concrete. Ideally a drilling rig stand is recommended as this can be fixed down to ensure there is no movement in the set-up. However, for smaller diameters it is possible to use a hand-held diamond drilling machine. A constant flow of water of up to 4 litres per minute is advisable on most reinforced concrete applications, so direct mains water feed is recommended. The P5-WC wet cores can also be used to drill hard natural stones.

Features: Easy start diamond crowns and turret designed segments.

Performance Rating:

Product Spec Sheet

Product Details

Part Number	Specifications
DC11375	10 x 200mm
DC11380	12 x 200mm
DC11385	14 x 200mm
DC11390	16 x 300mm
DC11395	18 x 300mm
DC11400	20 x 300mm
DC11405	22 x 300mm
DC11410	24 x 300mm
DC11412	25 x 300mm
DC11413	26 x 300mm
DC11415	28 x 300mm
DC11417	30 x 300mm
DC11420	32 x 300mm
DC11421	35 x 300mm
DC11425	38 x 400mm
DC11427	40 x 400mm
DC11428	42 x 400mm
DC11430	48 x 400mm
DC11435	52 x 400mm
DC11437	57 x 400mm
DC11447	62 x 400mm
DC11451	67 x 400mm
DC11330	72 x 400mm
DC11456	77 x 400mm
DC11333	82 x 400mm
DC11336	92 x 400mm
DC11339	102 x 400mm
DC11476	107 x 400mm
DC11342	112 x 400mm
DC11343	117 x 400mm
DC11345	122 x 400mm
DC11348	127 x 400mm
DC11351	132 x 400mm
-----------	----------------
DC11353	16 x 500mm
DC11355	18 x 500mm
DC11357	20 x 500mm
DC11359	22 x 500mm
DC11361	24 x 500mm
DC11363	25 x 500mm
DC11364	26 x 500mm
DC11365	28 x 500mm
DC11367	30 x 500mm
DC11369	32 x 500mm
DC11371	35 x 500mm

Suitable for use on:

Bricks - Class A Engineering
Bricks - Class B Engineering
Bricks - Standard Facing Bricks
Clay Products
Concrete - Beams, Kerbs, Pipes and Slabs
Concrete - Block Paving
Concrete - Flag Stones
Concrete - Flint Aggregate
Concrete - General Purpose
Concrete - Heavy Steel Reinforcement
Concrete - Light Steel Reinforcement
Concrete Blocks - Solid Density 12+ Newton

Machine Suitability

Dedicated drill motors and Drilling rigs

Usage Advice:

A good and consistent water flow is key when using wet diamond cores. It also aids the removal of the material from the core, once the hole is completed.
when drilling, maintain a steady pressure, allowing the bit to do the work. Excessive pressure will reduce drilling speed and potentially overload the machine.

Registered Number: 02965789 England

Registered Address: The Quay, 30 Channel Way, Ocean Village, Southampton, SO14 3TG

Trading Address: Unit 10 The Boulevard, Altira Park, Herne Bay, Kent, CT6 6GZ, UK

Opening Hours

Mon-Fri: 8am - 5pm
Sat-Sun: Closed

Contact

Tel: +44 (0)1227 711555
This email address is being protected from spambots. You need JavaScript enabled to view it.

Opening Hours

Mon-Fri: 8am - 5pm
Sat-Sun: Closed

Contact

Tel: +44 (0)1227 711555
This email address is being protected from spambots. You need JavaScript enabled to view it. This email address is being protected from spambots. You need JavaScript enabled to view it.

About Us

Premier Diamond Products is a leading specialist supplier of top quality diamond blades, diamond core drills, diamond grinders
read more...