ST-TGD

ST-TGD Tile And Glass Drill BIt

The advanced tip geometry of the SiteTuff ST-TGD Tile and Glass drill bit penetrates the material instantly, giving pinpoint accuracy when most needed. Used on rotary only and at slow speeds, allows the bit drills sensitive products such as glass and delicate glazed tiles cleanly and smoothly.

The ST-TGD can also be used to drill materials such as facing bricks, concrete blocks, wood and plastic with ease. With a little added water as a coolant, the bit will even drill problematic materials such as porcelain and marble.

Product Spec Sheet

Product Details

Part Number	Specifications
GT40656	5 x 70 x 40mm - 6.35mm/ ¼” HEX
GT40657	5.5 x 75 x 45mm - 6.35mm/ ¼” HEX
GT40658	6 x 75 x x45mm - 6.35mm/ ¼” HEX
GT40659	7 x 80 x 50mm - 6.35mm/ ¼” HEX
GT40660	8 x 80 x 50mm - 6.35mm/ ¼” HEX
GT40661	10 x 100 x 70mm - 6.35mm/ ¼” HEX
GT40662	12 x 100 x 70mm - 6.35mm/ ¼” HEX
GT40663	16 x 100 x 70mm - 6.35mm/ ¼” HEX

Suitable for use on:

Bricks - Standard Facing Bricks
Fibreglass
Laminated Products
PE Polyethylene Plastic
PP Polypropylene Plastic
Tiles - Ceramic
Chipboard
Construction Timber
Medium Density Fibreboard (MDF)
Plywood
Concrete Blocks
Hardwood
Softwood
Glass

Machine Suitability

Cordless Drill
Corded Drill

Usage Advice:

Always wear the appropriate PPE
The ST-TGD’s are designed to be used at slow speeds, always ensure that your drill is on the slowest speed setting before use
DO NOT use on percussion or hammer action.
When drilling Glass, Porcelain or other hard materials, a good flow of water coolant is required. This can be applied by means of a spray bottle or sponge
It is strongly recommended that you use a new bit when drilling glass. Any damage to the tip of bit may cause the glass to splinter or crack
DO NOT apply excess pressure as this may damage the material when drilling and will, slow the feed rate down

More products in the Tile And Glass Drill Bits range

Registered Number: 02965789 England

Registered Address: The Quay, 30 Channel Way, Ocean Village, Southampton, SO14 3TG

Trading Address: Unit 10 The Boulevard, Altira Park, Herne Bay, Kent, CT6 6GZ, UK

Opening Hours

Mon-Fri: 8am - 5pm
Sat-Sun: Closed

Contact

Tel: +44 (0)1227 711555
This email address is being protected from spambots. You need JavaScript enabled to view it.

Opening Hours

Mon-Fri: 8am - 5pm
Sat-Sun: Closed

Contact

Tel: +44 (0)1227 711555
This email address is being protected from spambots. You need JavaScript enabled to view it. This email address is being protected from spambots. You need JavaScript enabled to view it.

About Us

Premier Diamond Products is a leading specialist supplier of top quality diamond blades, diamond core drills, diamond grinders
read more...